1450-Straight line- double facet-lock-bottom-4-6corner operate
Folding Gluing Machine
Qualities:
1.Driving by synchronous belt,make sure easy and exact operating.
two.Inverter driving,stable and power preserving.
3.Use electrical adjust,straightforward run.
four.Automated continuous feeding,use several belt with vibrating motor,(for higher configuration use drilled suction belt),to preserve the feeding steady.
5.Automatic counting and kicking,amount can preset.
6.Conveyer stress adjustable according to the box to make sure best quality.
2. Major technological parameter:
Product | ZH-M1450 four/six |
Appropriate content | AB/BE/A/B/C/E/F flute , Card board210-850gsm |
Max method | Automated steady feeding |
Max mechanical pace | 300m/min |
General dimension | 19700*2300*1650mm |
Excess weight | thirteen.5T |
Power use | 27.2KW,380V,50HZ |
Compressed air | six bar,ten m³/h,sixty L |
Equipment configuration
Major motor | GPG |
PLC | Siemens |
Inverter | Siemens |
Contact monitor | Siemens |
Driving CZPT | NSK |
Plain belt | NITTA Japan |
Lower voltage apparatus | Schneider( Relays, contactor,breaker,Button) |
Picture Change | Panasonic |
Wall thickness | 20m (appropriate side,still left aspect) tempered |
Gluing method | KQ CHINA |
Servo motor | Delta (ZheJiang ) for back again fold |
Servo motor | VEICHI China (control the folding section belt)another company CZPT it |
Function:
1.Feeder Area
·Friction feeder. Independently driven by inverter.
Adjustable digital pile vibrator.
·Lateral feed gates entirely adjustable to the width of the blank.
2.Paper Alignment Program:
Independent area that registers the blank to a single side guaranteeing a excellent parallelism just before moving into the pre-folding or gluing sections.
Independently driven by motor.
Possibility to sign-up on any aspect of the machine.
Fast and easy set up.Configuration reducer, different bins when the conversion, the reducer with electric regulation
three.Pre-fold Section:
The pre-fold area has the advantage to make the box a lot more simple and easy to open,even in some situation the scoring is not very nicely.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 135º.
1st and third crease openers.
Configuration reducer, various containers when the conversion, the reducer with electric powered regulation
4.Bottom Lock Part
Lock-base assembly system with high elastic hookers is of offer design and style,quickly and easy procedure.
·Independently driven by motor.
Complete established of folding hooks and helixes for easy and exact folding of entrance flaps
Adjustable hook rigidity.
Fast and effortless setup
Configuration reducer, distinct packing containers when the conversion, the reducer with electric regulation.
5.Down Gluing segment
·Two decrease (still left and appropriate) gluing tanks.
·Easy to take away and cleanse.
six.Folding Section
Independently pushed by motor.
Smooth and exact folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable speed managed by inverter
Easy accessibility.
Configure the servo motor to change the belt speed,Make the box much more neat
seven.Trombone Section
·Independently driven by motor.
·Upper and lower travel system for length adjustment.
·Allows a ideal understack or overstack stream of boxes.
·Equipped with automated belt rigidity-adjusting program.
·Continuous and computerized box selection mechanism that ensures a neat transfer to the Push area, guaranteeing an aligned stream.
8.Push Part
·Independently motorized pneumatic push section.
·Upper area moves back and CZPT through a motorized technique, making it possible for various box length.
·Pneumatic pressure regulation.
nine.Again-folding device
·Motorized and untimed electronic again folding method with smart servo-motor technological innovation.
·Two impartial servo motors, 1 for each and every shaft.
·Versatile and effortless to setup.
Gluing method
one. Main specialized parameter:
Model HZ4
Enter voltage | AC220V (±20%)50-60HZ | |
Energy | 480W | |
Glue-like precision | ±1mm | |
Gel-point | four kinds | |
Model | HB6 | |
Guns | three | |
To adhesives max viscosity | 3000mPas | |
Every single two-way transport efficiency | 6:one | |
Gas supply input needs | two-8bar | |
Bodyweight | 25kg | |
Measurement | 1280*480*600mm |
Plasma Surface Treatment
Principal complex parameter:
Product | Cleanse-PL-5571 | |
Enter voltage | AC220V | |
Nominal power | 1500AV | |
Plasma electrical power offer frequency | 20-30khz | |
Air supply pressure | 60L/m³ | |
Dimension | 720*970*1270 | |
Outlet angle | <20mm | |
two guns | ||
Fat | 95kg |