worm reduction

Our standard 700 Series – the heart of Ever-Power quickness reducer products – has been serving industry reliably for over 10 years. Its proven modular style has set the industry standard for performance and is the most imitated product in the current worm gear velocity reducer marketplace. But why settle for a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes have earned a status to be an industry benchmark worldwide. Our success came from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes are inexpensive prices. High versatility accorded through a wide choice of mounting options, shaft configurations and electric motor interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm version, with or without the torque limiter, soon add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low velocity gear ratio. Being simple and compact in style, these gears can perform higher gear ratio compared to the helical gears. These worm decrease gears having screw type characteristics are similar to helical gears, but its helix position is typically comparatively larger) and its own body is normally quite lengthy in the axial direction. The gears in these gearboxes can be right or left-handed dependant on the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (one or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is usually shaped just like a screw and the worm wheel can be a kind of gear machined to get a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is equivalent to a nut that is fixed to ensure that it cannot rotate and for that reason progresses in the axial Worm Reducer direction when the bolt is turned.
The look of a worm gear is considered through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Due to this, in a 1 speed reduction gears, the wheel can be manufactured therefore that it’ll be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature makes it possible to layout the turning tranny direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation path of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide variety of shaft layouts is among the top features of interlocking gears.For instance, right shaft output, still left shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Number 2) and, if attachment orientations are included, you’ll be able to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is usually characteristic since the contact is certainly linear and the relative slide is great. In comparison to rolling power transmission, noise and vibration are really low. For this reason, this technology is utilized to drive medical devices, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
Selection
When selecting a worm reduction gears, the procedures for selecting the right gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care ought to be taken in key areas such as selecting the load index, calculating the overhang load and examining the heat rated capability from the manufacturer.
Cautions during use
When utilizing a worm reduction gears, the heat produced during the initial period of make use of is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is paramount to sufficiently achieving the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to change the lubricating oil and to change the lubricating oil from then on about 1 time each year according to the procedure manual supplied by the manufacturer.
Product Description
The Worm Decrease Gear Box is supplied by our company is of supreme quality. Our products are created by using premium quality materials and enhance technology at our vendors end. They are widely used in a variety of sectors. Our items are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Frame, Flange Mount.
Option B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and secure operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the sector worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute flexibility is distributed by the wide choice of several installation options, shaft configurations and electric motor interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) offers great versatility to match a broad range of applications and provides higher efficiency than the compact range XC, where in fact the emphasis is on space performance.
Series H offers the same features because series X with an extra plus: a spur equipment pre-stage at the insight end provides higher performance and a broader selection of ratios compared to the X series.
Frame sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft is supplied as standard.
Broad range of possibilities:
second input, result flange, single or dual extension output shaft, torque limiter with through cable, torque arm.