Rope pulley

Hanging Pulleys to get Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about 50 % the pressure of a single-groove pulley to go the same load.
Pulleys with a metric gear rack china bearing are easier to switch than pulleys with out a bearing.
Acetal, nylon, and light weight aluminum are lightweight and corrosion resistant. Stainless is the most corrosion resistant.
Designs C, D, and J have a bracket on the bottom for tying off one end of a rope.
Style K reduce the force needed to keep your load set up. Unlike standard pulleys, these have a V-groove for more hold on your rope, plus they ratchet when under load therefore they won’t slip in the other direction. Pulley for3/8″ dia. rope could be set to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Light weight aluminum and nylon are light-weight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Acetal and aluminum are light-weight and corrosion resistant. Galvanized steel is usually more corrosion resistant than iron and steel. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Aluminum is more light-weight than stainless steel. Stainless steel is definitely more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the power of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Stainless steel is usually more corrosion resistant than steel.
Hanging Pulleys to get Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the pressure of a single-groove pulley to go the same load. They have got a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang in your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Mount these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and tackle systems.They can reduce the force had a need to move the load by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or products over people.
Hanging Pulleys designed for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about half the power of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Style Electronic pulleys have bracket upon the bottom that lets you tie off 1 end of your wire rope.
Warning: Never use to lift people or items over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a free rope end is not needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and deal with systems. They require about half the force of a single-groove pulley to go the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to maintain rope secure.
Warning: Never use to lift people or items over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move a single load, such as for example block and tackle systems. They can reduce the force had a need to move the load by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Style A pulleys have a bracket on underneath for tying off one end of a rope.
Warning: Never make use of to lift people or items over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end isn’t needed.
Warning: Never make use of to lift people or items over people.