CONSTITUENTS
l Unwinding unit
l Unwinding driven device
l Pre-heating device
l Printing device
l Drying device
l Rewinding driven unit
l Rewinding unitl Control system and operating platform
Equipment Main Complex Features
A. Printing content: PPPEPETPVC…
B. Web thickness: 10-70μm
C. Max. printing width: 800~1500mm
D. Printing colors: four~twelve hues
E. Printing repeat: four hundred-800mm(φ127-φ255mm)
F. Plate/Tape thickness : (a) one.7+.38mm (b) 1.143+.5mm
G. Max. equipment pace: 450m/min
H. Printing pace: fifteen-400m/min
I. Lubrication system: Centralized lubrication
J. Web course: From remaining to right(from operator’s aspect)
K. Ink kind: H2o-primarily based, ethanol-based mostly or solvent-primarily based ink
L. Driven approach: Servo motor pushed
M. Register precision: ±0.1mm
N. Power supply: 380V,50Hz(Or at customer’s requirement)
O. Max. unwind/rewind diameter: φ600mm
P. Heating approach: CZPTal heating (Accessible of sizzling oil, gas heating)
Q. Total Motor electrical power: 110kw(primarily based on 1200-8)
R. Running electrical power: 60KW (dependent on 1200-eight)
S. CZPTal heating power: 120KW (primarily based on 1200-8)
T. Max. sound: Reduced than 85dBa(1m from the machine)
U. Suggestion procedure temperature: ten-35 0C
V. Relative humidity: thirty-eighty%(200C as reference temperature)
W. Elevation top: Max.1000m
X. Compression air: No lubrication,drying and wipe off humidity with filter
Air force: 6Bar Dew point:+2C
Y. Tension control: 6~18kg/total load
Z. Cooling h2o: Filter:less than 20u
stress:Min.2Bar–Max.3Bar
cooling roller getting into h2o temperature(space temperature+200C):from 15ºC to 180ºC
central drum recycling h2o temperature:300ºC±20ºC
hardness(CaCO3):2.5-4mg/L
PH:seven-eight.two
AA. Machine coloration: RAL3571(crimson)+RAL7035(cream)
BB. Machine measurement(L×W×H): 11m×4.5m×5.five m
