The EP Greenhouse geared motor is a compact and lightweight reduction gearbox with a built-in limit switch system that is suitable for assembly of a locally available electric motor. The gearbox can be used in manually-managed or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-install EP gearbox is certainly rainproof and windproof. The reducer has a high protection class (IP65) and can be utilized in an ambient temperature of 0-60 °C.
The low-noise gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is locked when the reduction gear motor isn’t running. The completely sealed reduction gear driver comes with an growth chamber with a diaphragm to keep carefully the gear oil at a low pressure under all circumstances, even at high temperatures. Thanks to the use of an growth chamber, the reducer can be installed in any position. There are no restrictions, because there is no need for a bleed plug. The sealed reduction gearbox keeps the gear essential oil of the gear motor in optimum condition because of its entire operating lifetime. The gearbox is ideal for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gear reducer comes with an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit switch system is obtainable and easy to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear 
reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).