• Motor gearboxes are maintenance-free, small power resources for driving vent, screen, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase options for your individual needs.
• Key feature of the drives certainly are a self-braking worm equipment transmission and a built-in linear limit switch device.
shaft-mounted gear motors are full electromechanical drives where the speed of the installed electrical motor is decreased to the required value using two to 4 reduction stages. The drives are high performance and durable and show a concise and lightweight design.
The compact design is made possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent fat loss compared to commercially offered drive motors. That is accomplished through the consistent application of aluminium die casting technology, which guarantees a high Greenhouse Gear Motor degree of rigidity for the gear and motor housing at the same time.
Each drive is produced and tested particularly for every order and customer. A advanced modular system allows for an excellent diversity of types and a maximum degree of customization to customer requirements.
Because of their integrated control systems, the shaft-mounted equipment motors will be the ideal drives for applications in reversing mode. In both rotation directions, described end positions are shielded by two placement limit switches. This uncomplicated answer does not just simplify the cabling, but also can help you configure the finish positions efficiently. The high shut-off accuracy of the limit switches ensures safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electric panel, it can run and stop after set amount of turns. Then it can open and close the home windows for greenhouse ventilation to right positions.
To keep the delicate environment in the greenhouse, climate control systems are a necessity. Several mechanical systems can be used in this respect; however cup vent drive systems have a tendency to be the most famous. The drive system consists of a central gearmotor linked to a 40:1 right angle reducer with dual result shafts. These OP shafts connect to long jack shafts that spread over the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open and close large glass windowpane panes in the ceiling for temperature control.
With respect to the size of the application (amount of the shafting, quantity and weight of the windowpane panes) we provides two gearmotor solutions from a modified edition of their 200 series parallel shaft collection – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; however the motors are ranked continuous because the glass pane home windows could potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also known as Engine Gearboxes, is a particular kind of electrical motor that is designed to generate high torque whilst maintaining a minimal horsepower, or low velocity, motor output. Gear motors can be found in many different applications, especially for the greenhouse, livestock and agricultural market, our motors can be found options to use roof vents, wall structure vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment errors and can be very easily removed without disturbing the entire shaft.
shaft-installed gear motors are full electromechanical drives in which the speed of the installed electrical motor is decreased to the required value using two to four reduction stages. The drives are powerful and durable and show a compact and lightweight design.