A chain and sprocket drive is a type of power transmission when a roller chain engages with two or more toothed wheels or sprockets, used in motors as a drivefrom crankshaft to camshaft.
Ever-ability is proud to share a wide collection of Sprockets along with our huge variety of agriculture, gardening, preparing food and outdoor goods. We stand behind all 26,000 items we sell with this sprockets Satisfaction Guarantee. CUSTOMER SUPPORT may be the 
cornerstone of our family business, and has been for over 50 years.
Application
Ever-power travel sprockets provide durable, reliable service and show replaceable tooth plates for easy field protection. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL in addition to the 175 and 260 series use our nonsymmetrical profile.
Travel sprockets weren’t always made to be bolted in. At one time they were welded onto the final drive motor and needed to be trim off if they were replaced. Eventually, welded-on adapters were set up that allowed the sprocket to become bolted on, and newer designs use the bolted approach altogether.
When someone sends in your final drive motor for all of us to take a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t need the sprocket in location to evaluate the engine and the added pounds (that can be significant) unnecessarily enhances your shipping costs.
Signs of Sprocket Wear
The teeth on a travel sprocket are where you search for wear . They must be tall and smooth by the end, not sharpened or dished by the end. And the sprocket, and even more specifically its teeth, start to wear, its size becomes more compact. This causes what is known as a pitch mismatch, where in fact the the teeth on the sprocket no more connect to the track backlinks as effectively. This may accelerate the wear of the sprocket and decrease the efficiency of your devices.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive electric motor.
Preventing Sprocket Wear
One of the key ways to prevent accelerated sprocket dress in is to check the track stress. If the tension is too tight, it’ll cause dress in on the sprocket the teeth. We’ve talked before about the value of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (particularly if there is usually a build-up of dried mud and debris). That’s section of the cause we put so much focus on keeping the undercarriage clean
Conclusion
With out a functioning drive sprocket, your track drive won’t be able to propel your machine. Fortunately, there are ways to help your travel sprocket last longer: keep the track pressure at an effective level and keep your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track machine ought to be inspected regularly. If you find early wear or damage to your tracks, a donned sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-electricity sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The replacement and protection of tooth plate segments will not require removing of the travel shaft, bearings, etc. Ever-power also designs customized split hub pieces for retrofit applications that minimize field labor costs.
At primary glance, you might think that if you’ve seen one drive sprocket, you’ve seen them all. However, Ever-ability offers added an I.D. lip and spiral ring that captivate the needle bearing along with an exterior snap ring that increases performance and reliability. While simple to overlook, it’s this focus on depth that the racer provides come to expect from Ever-power.
An I.D. lip and spiral band that captivate the needle bearing
Exterior snap ring caps sprocket about drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard
Drive sprocket
Tags: