Cyclo Drive Reducer

Cycloidal pinwheel reducer is definitely a up-dated of fresh type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin wheel clenching mechanism, which are trusted in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical Industry, project machinery etc, cranes and conveyors. various fields.

1. Gear is made from high power low carbon alloy metal by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is used for all good contact functionality, gears and with large precision
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light-weight, long service existence and high bearing capacity;
5. easy to assemble, disassemble and check.

Operation specifications and precautions
1.High modularization design: various equip with various electric motor or other power source conveniently.Same machine type may equip with numerous power motor. It really is easy to know the combination and
junction between every equipment type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form very large transmitting ratio, i.e. productivity very low rotary speed.
3.Form of assembly: the positioning to be installed is not limited.
4.High strength, small: the box body is constructed of great strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and great grinding process, which means bearing capacity of unitvolume is substantial.
5.Long life: Beneath the condition of correct type chosen (including choosing appropriate operation parameters)normal operation and maintenance, the life span of main elements of speed reducer (except dressed in parts) shouldn’t be less than 20000 hours. The putting on parts include lubricating oil seal, essential oil and bearing.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is usually low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High swiftness ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-downward ratio and the efficiency is a lot more than 90%. If use multi-speed travel the speed-down ratio is bigger.
2. Compact
Being adapted epicyclic tranny basic principle, the input and outcome shaft are in same axis middle, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can know high reduction ratio device.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved concurrently, and there are two gears engaged with 180 degree symmetry. Consequently, the affect of tooth pitch mistake and cumulative tooth pitch error on the rotation precision is relatively average, which makes the positioning precision and rotation accuracy reach an extremely high level.
4. Less parts, convenient installation
The three basic pieces achieve a higher deceleration ratio, plus they are all on a single axis, so the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the quantity is 1/3, the pounds is 1/2, but can obtain the same torque ability and reduction ratio, attaining small lightweight.
6 High torque capacity
Flexible wheel material USES specialized steel with great fatigue strength.Different from ordinary transmission machine, the quantity of teeth meshing makes up about on the subject of 30% of the full total amount of teeth. Additionally, it is in get in touch with with the surface, so that the pressure borne by each gear is reduced and excessive torque capacity can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss due to friction. Therefore, high lowering ratio can be achieved while maintaining high proficiency, and miniaturization of generating motor could be realized.
8. Low noise
The gear meshing cycle quickness is low, the transmission motion force balance, therefore the operation is quiet, and the vibration is very small.
◆Substantial speed ratio and excessive efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will end up being larger.
◆Because planetary transmission basic principle is adopted, the type shaft and output shaft are on the same axis line, so that the machine model can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is much larger, and the mechanism of balancing machine parts will make the vibration and voice limited to a minimum.
◆Reliable use and long service life because the main parts are made of huge carbon chromium steel, great strength is going to be obtained by quenching (HRC58-62), and rolling friction is utilized in a few transmission contacts, therefore the service life is long.
Cycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has various advantages, versatile, and may be both positive and negative operation.

•Big ratio, and excessive efficiency Smooth operation,

• low noise The utilization of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically no wear, durable.

• Compact structure,

• small size Because the utilization of a planetary transmission, the input shaft and the output shaft on a single axis, making the model to obtain the smallest possible size.

• Reasonable design, easy repair, and breakdown easily install,

• the least number of parts and simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion precision, carrier and increase the output strength.

(2).Hoop clamp coupling have five connection ways suited to different application environments.

(3).Size in this article PL/PF120(incorporating)precision and high durability integral inner gear casing, processed in one station,which remove the cumulative mistake and assembling mistake of split type.Get rid of casting process;adopt incredibly hot of forging process, that may decrease the blank material defects.

(4).The meshing gear adopt shaving procedure after carburizing and quenching,which better to make gear area smooth and high accuracy,reduce the temperature rising caused by gear surface area gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its performance and mounting dime nsions conform the same kinds of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, radiate heat efficiently, compact structure, beautiful condition and low noise.
Great sealing and adaptability.Its blend with T equipment reducer and MB/MBN variator can meet all types of speed requirement.