Our worm gear reducers offer an option of a solid or hollow output shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, however, can endure shock loading much better than other reduction gearbox styles, making them ideal for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Velocity Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s rate reducer products – has been serving industry reliably for over 40 years. Its proven modular style has set the sector standard for overall performance and is the most imitated product in the current worm gear swiftness reducer marketplace. But why accept a knock-off when you’re able to have the initial – from EP Gear.
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
The 700 Series’ huge oil reservoir provides worm reduction gearbox efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, as well as greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high insight speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales personnel for help identifying which gearbox solution is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers were created with a hollow bore and allow for a corner turn with optional dual output. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting options providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The right angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our right angle planetary gearboxes offer a robust solution. The proper angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest operation of our speed reducers. These gearboxes are designed to handle varying loads with small backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we have a solution to suit your needs. Our 52 frame size can be available with plastic gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations provide the highest performance and best output torque of most our acceleration reducers. These gearboxes are designed to deal with varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio choices ranging from 5:1 to 1000:1, we have a solution to fit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes will be the top choice for constant duty applications. Their equipment cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes possess the shortest length of our inline equipment reducer options so they work very well in conditions with limited space. Our parallel shaft gear reducers offer an affordable drop-in replacement solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a equipment in the kind of a screw, also known as a worm, meshes with a worm gear. These gears are typically created from bronze and the worms are steel or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are considerably smaller than other gear reduction boxes. A main benefit of worm equipment reducers is certainly that they create an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox provides right hand threads; to change the direction of the result, a left-hand thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio