small worm gearbox

Small Precison Worm Reduction Gearboxes
There are many of specifications you will need to consider when making a worm gearbox selection.
First, what is the input and output torque requirements? Next, examine vendor horsepower/torque charts and pick the correct worm gear reducer.
If how big is the gearbox will likely be an important consideration after that check the reducer dimension specifications, not all manufacturers make compact units. In fact, working with the right supplier will help you not only find the right gear reducer but also prevent some of the most typical mistakes in reducer selection. We offer a free guide to assist you find the appropriate supplier to utilize.
For low and fractional horsepower software we offer two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output are the major differences between both of these models. Both feature either a hollow or solid output shaft. Both versions are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or project is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is so versatile it can work just about anywhere.
Features & Options
Double Shaft or Single Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power provides designed and built exclusive, high precision mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that are designed and built to meet your unique specifications.
E mail us for the mini gearbox the application requires, or demand a quote upon a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, rate reducers, gear drives, and gearmotors. All conditions can be used pretty much interchangeably. Please be aware that the links for our small gear drives include information on the full selection of body sizes for that series or design.
Bevel Box Micro Equipment Drive
Our bevel box miniature gear drives are application rated for the the best possible balance of efficiency and cost. Torque could be balanced to meet your RPM and working life requirements. Lightweight with low backlash performance (as little as 1°, with choice of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They offer an output shaft at 90° from the input, and so are available in gear small worm gearbox ratios from 1:1 to 40:1. Lightweight but durable, with machined light weight aluminum housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also called “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from reverse sides of the casing; output is usually a keyed bore. Standard single- and double-end shafts can be found and supplied with keys and retainer rings. An array of equipment ratios and input sizes can be found to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and long term lubrication. They provide two insight shafts on opposing sides of the frame, with two result shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high efficiency overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes produce an output at 90° from the input. They deliver superior overall performance in an amazing array applications and are built with little footprints, making them well suited for procedures where space is limited. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for boosts to 3,000 RPM. Aluminium housings and stainless steel gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your most demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and feature rugged building for challenging power transfer procedures. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and manufacture a customized miniature gearbox to meet up your unique specs. We can produce custom micro gearboxes in virtually any configuration your application requires, with output torque amounts as high as 900Nm. We are able to work from your own gearbox styles, reverse engineer a preexisting unit, or help you develop an all-new style that provides the performance you will need. Request a quote on a custom miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and special ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and result shafts with drive essential and retainer rings can be supplied to your specifications for any of our hollow bore miniature gearboxes. We provide a basic selection of one ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our app engineers to discuss your particular needs.
We offer a broad selection of misalignment shaft couplings in inch and metric bore sizes. ” and metric precision surface shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox professionals. All of our micro gear drive models deliver superior performance in a small footprint, and are durable enough for challenging function environments. E mail us to learn more about our mini gearboxes, or request a quote on a custom model that is tailored to your needs.
Additional benefits of worm drive gearboxes include: