hydraulic planetary drive

Single and double reduction planetary gear drives to be used with electric, hydraulic, surroundings motors or mechanical power insight from high quickness, low torque sources to provide decreased speeds at increased torques. The input aspect has standard SAE pads for motor mounting. Available in the three output configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input speed is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Systems provide 95% power transmitting efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output side has hub for mounting vehicle wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is definitely standard on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined input. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and high temperature treated ring equipment to minimize backlash growth due to wear. The external bearing nut supplies the hydraulic planetary drive supreme in shaft retention and shaft power. Output could be a spindle shaft or numerous sizes of essential pinion gears.