Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up however the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for change type.)
T (See “App Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The electric fan motor china approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). If you order several engine at the same time, we can do our better to supply your purchase with each one kind of control or the excess.
Application Note: Do NOT use this electric engine in a nonfan app. This is a completely enclosed fan electric engine and made to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electrical motor will overheat and enter 
automatic thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the engine and cause it to proceed into automatic thermal overload. (Your companion blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric engine is manufactured in China.